Best 13 Pro Vinyl Floor Cutter for LVP, WPC, LVT, SPC, VCT, PVC and Rigid Core Vinyl Plank

The difference between moving the blade and not being able to move it is the key distinction. Our LVT-330 cutter is designed for cutting a wide range of flooring materials, including LVP, WPC, SPC, LVT, VCT, PVC, and vinyl planks. It offers a maximum cutting length of 328 mm/12.9 inches and a maximum thickness of 8 mm/5/16 inches.

The blade of this cutter can be moved from either side of the blade holder, enabling you to make precise notch cuts. The adjustable handle angle provides easy operation, movement, and storage. This versatile tool allows for straight cuts, angle cuts, L-shaped cuts, U-shaped cuts, and rip cuts, catering to diverse flooring installation needs.

Slotting blades in sizes of 0.5 inch, 1 inch, 1.3 inch, and 13 inch are included, primarily used for complex tasks such as indoor corners, kitchen islands, door frames, and floor paving. These slotting blades can save a significant amount of time, and it is recommended to leave all complex paving tasks until the end for unified completion.

The cutting steps involve completing steps 1-4, rotating the floor, and then replacing one of the slotting blades to complete steps 5-7. This process is particularly beneficial for soft vinyl flooring with a cutting length of 13 inches or other sizes. For hard, crack-prone flooring, it is crucial to cut shallowly, approximately 1/16 inch deep and 4 inches in length, to prevent cracking.

The LVT-330 cutter features a fixed slotted blade in sizes of 0.5 inch, 1 inch, and 1.3 inch, designed for U-shaped cutting and other intricate patterns. The floor installation scenario shown includes straight cuts, L-shaped cuts, U-shaped cuts, and lengthwise cuts, catering to a wide range of installation requirements.

When cutting crack-prone SPC (Stone Plastic Composite) or RVP (Rigid Vinyl Plank) flooring, it is crucial to control the depth and length of each cut. Each shallow cut should be approximately 5 inches long and 1/16 inch (1-2 mm) deep, allowing you to maintain control over your arm strength and prevent floor cracking.

The LVT-330 cutter is an essential tool for professional vinyl flooring installation, with its ability to handle a variety of cutting tasks, including irregular corners, columns, door edges, and wall corners. Its 12.9-inch cutting width, 5/16-inch cutting depth, and clear measuring guide make it a valuable asset for any flooring installer. The cutter is easy to use and convenient to carry around, saving you time and effort on the job site.

Remember, the LVT-330 cutter is designed specifically for cutting LVP, WPC, SPC, LVT, VCT, and PVC vinyl plank flooring. It cannot be used for cutting laminate flooring or other hardwood materials, as doing so may void the warranty. Always follow the manufacturer's instructions and recommendations to ensure safe and effective use of the tool.

product information: